Home > Products > GPS Products >Bluetooth GPS Receiver
 
 
Specification
FAQ
EDM
 
     
   
 
General Accuracy (none DGPS)
GPS Chip MTK II GPS Module Position
Frequency L1, 1575.42MHz Without aid: 3.0m 2D-RMS < 3m CEP(50%) without SA(horizontal) DGPS (WAAS, EGNOS, MSAS): 2.5m
C/A Code 1.023MHz chip rate Velocity Without aid: 0.1m /s, DGPS(WAAS, EGNOS, MSAS): 0.05m /s
Channels 66-CH Performance tracking Time 50 ns RMS
Antenna (Intemal) Built-in patch antenna with LNA Datum WGS-84
Sensitivity Dynamic Conditions
Tracking -165 dBm Altitude < 18,000m
Acquisition Rate Velocity < 515m /sec
Cold Start 35 sec, average Acceleration < 4g
Warm Start 33 sec, average Update 1 or 5Hz in hardware (1~5Hz adjustable by software utility)
Hot Start 1 sec, average Interface
Reacquisition < 1 sec. Bluetooth V1.2 compliant (SPP profile)
GPS < 15 sec fix Class 2 (15 meters in open space)
Power Frequency: 2.4~2.4835 GHz
Built-in rechargeable Li-ion battery  
Power Charge Car Charger Power On/Off Slide switch(5Hz/Nav/Off)
Operation Time 32hrs, after fully charged, in continuous GPS Protocol
Charging time 3hrs. (Typical) NMEA-0183 (V3.01) - GGA, GSA,GSV, RMC(default), Baud rate 115200 bps, Data bit : 8, stop bit : 1(Default)
Environmental
Operating Temperature - 10 °C to + 60 °C
Storage Temperature - 20 °C to + 60 °C
Charging 0 °C to + 45°C Device Size
Accessories 72.2 (L) X 46.5 (W) X 20 (H) mm
Rechargeable Battery LED function
Car Charger Bluetooth connection, Navigation Status, and Battery/charger status
  Certification CE/FCC/RoHS